Summit L4-1795cc 1.8L SOHC (1995)
Alternator Relay: Testing and Inspection
Generator Relay Continuity Check
Generator Relay
1. Remove the generator relay from the relay box inside the engine compartment.
Generator Relay Continuity Check
2. Use an ohmmeter check that there is continuity when the (+) terminal of the tester is connected to terminal 4 of the generator relay and the (-)
terminal is connected to terminal 2.
3. Next, check that there is no continuity when the (+) terminal is connected to terminal 2 and the (-) terminal is connected to terminal 4.
4. If the continuity checks in steps (2) and (3) show a defect, replace the generator relay.