Summit L4-1795cc 1.8L SOHC (1995)
Fig.10 Exploded View Of Rack And Pinion Steering Gear
Assemble rack and pinion in reverse order of numbered sequence shown, noting the following:
1. Apply Dexron or Dexron II automatic transmission fluid to O-rings, seal rings, entire surface of oil seals and rack.
2. Apply Mopar multi-mileage lubricant or equivalent to ball bearings, entire surface of needle bearings, rack teeth and pinion teeth.
3. Using suitable tools, press back-up washer and oil seal, pinion needle roller bearing and ball bearing and housing oil seals into housing.
4. Cover rack teeth with rack installer tool No. MB991212, or equivalent.
5. Apply Dexron or Dexron II to installer, then match oil seal center with rack to prevent retainer spring from slipping.
6. Slowly insert rack from power cylinder side.
