Summit Vista AWD L4-1795cc 1.8L SOHC (1992)
Water Pump: Service and Repair
Fig. 21 Water Pump Bolt Installation
1.
Disconnect battery ground cable and drain cooling system.
2.
On models with power steering, remove power steering pump and bracket leaving hoses connected, and secure pump aside.
3.
On all models. remove timing belt, refer to TIMING BELT.
4.
Remove alternator brace and disconnect hoses from water pump.
5.
Remove water pump bolts, noting length and position for installation, then remove water pump, gasket and O-ring.
6.
Reverse procedure to install. Refer to Fig. 21, for bolt length and position.
