eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Temperature Sensor (Gauge) > < Diagram Information and Instructions|Page 1332
Page 1
background image

Radiator Cooling Fan Temperature Sensor / Switch: Service and Repair

1.

Disconnect battery ground cable.

2.

Drain coolant from radiator into suitable container.

3.

Remove thermo sensor wiring from sensor located in lower radiator tank.

4.

Remove sensor from radiator.

5.

Reverse procedure to install. Torque sensor to 7-14 lb-ft.

Temperature Sensor (Gauge) > < Diagram Information and Instructions|Page 1332