Summit Wagon AWD L4-1795cc 1.8L SOHC (1994)
Cross-Member: Service and Repair
Fig. 21 Rear Crossmember Replace
REAR CROSSMEMBER REPLACE
1. Remove rear crossmember assembly as shown, noting following:
a. Support lower arm with a suitable jack, then remove shock absorber from lower arm connection.
b. Before removing coil spring scribe a mating mark on lower arm assembly and crossmember for installation reference, then loosen lower arm
mounting nut and remove coil spring.
2. Reverse procedure to install noting following:
a. Align coil spring ends with spring seat groove, then temporarily tighten lower arm mounting nut.
