eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Turn Signal Flasher > < Tail Lamp Relay|Testing and Inspection
Page 1
background image

Combination Switch: Service and Repair

NOTE:  Combination switch includes headlight, dimmer, turn signal and wiper/washer switches.

1. Disconnect battery ground cable.
2. Remove steering wheel.
3. Remove upper and lower column covers.
4. Remove wiring harness retaining straps, then disconnect electrical connectors.
5. Remove attaching screws, then combination switch assembly.
6. Reverse procedure to install.

Turn Signal Flasher > < Tail Lamp Relay|Testing and Inspection