Summit Wagon AWD L4-1795cc 1.8L SOHC (1994)
Throttle Full Close Switch: Adjustments
Closed Throttle Position Switch and Throttle Position Sensor Adjustment
Closed Throttle Position Switch
1
Disconnect the connector of the throttle position sensor.
2
Connect an ohmmeter between terminal 2 (Closed throttle position switch) and 1 (sensor ground) by using jumper wires.
Fixed Idle Adjustment
3
Insert a feeler gauge with a thickness of 0.65 mm (0.0256 in.) between the fixed SAS and the throttle lever.
Throttle Position Sensor
4
Loosen the throttle position sensor mounting bolt; then turn the throttle position sensor body fully clockwise.
5
In this condition check for continuity between terminals G and 02.