Summit Wagon AWD L4-1795cc 1.8L SOHC (1994)
STRUT SERVICE
Disassemble strut assembly as shown. Compress coil spring with tool Nos. MB991238 and MB991237, or equivalents, before removing locking
nut.
Removal/Installation
Fig. 8 Strut Replacement
STRUT REPLACE
1. On models with speed control, remove speed control actuator from righthand strut.
2. On all models, remove strut assembly as shown. Suspend lower arm from vehicle with suitable wire.
3. Reverse procedure to install. When compressing spring, do not use air tools to tighten spring compressor tool.
