Summit Wagon AWD L4-2350cc 2.4L SOHC (1995)
Steering Gear: Adjustments
1. With rack placed in center position, attach rack support cover to gear housing, then tighten cover to specifications using torque wrench socket tool
No. MB990607-A, or equivalent. Back off cover approximately 30-60°, then install and tighten locking nut to specifications.
2. In neutral position, rotate pinion shaft clockwise at a rate of one revolution every four to six seconds using preload socket tool No. CT-1108, or
equivalent, and a suitable torque wrench. Return rack support cover 30-60° and tighten to specifications. Pinion preload torque should be 5-11
inch lbs. Measure starting torque through entire stroke of rack.
3. If measured values are not within specifications, adjust rack support cover, then inspect again.
4. If still not within specifications, inspect rack support cover, rack support spring and rack support and replace parts as necessary.