Summit Wagon AWD L4-2350cc 2.4L SOHC (1995)
Differential Carrier: Testing and Inspection
Carrier Pre-Disassemble Inspection
Fig.28 Differential Carrier Positioned In Working Base
1. Support working base in a vise, and attach differential carrier to working base.
Fig.29 Final Drive Gear Backlash Measurement
2. Check final drive gear backlash as follows:
a. Lock drive pinion in place, then mount dial indicator as shown.
b. Measure backlash at four points or more on the circumference of the drive gear. Backlash should be within 0.004-0.006 inch.