Summit Wagon FWD L4-1795cc 1.8L SOHC (1994)
Malfunction Indicator Lamp: Description and Operation
Malfunction Indicator Light (MIL) Location
PURPOSE
The Malfunction Indicator Light (MIL), located in the instrument panel, will come on to warn the driver if a malfunction occurs in the following
circuits:
^
Engine Control Module (ECM)
^
Oxygen sensor
^
Air-flow sensor
^
Intake air temperature sensor
^
Throttle position sensor
^
Engine coolant temperature sensor
^
Crankshaft Position sensor
^
Camshaft Position sensor
^
Barometric pressure sensor
^
Ignition Timing Adjustment Signal
^
Injector
^
EGR
OPERATION
The ECM stores a code for the fault. Immediately after the ignition switch is turned on, the MIL will light for 2.5 seconds to indicate that the light
operates normally. When an irregular signal returns to normal the MIL goes out. Also, when the ignition switch is turned off, the light goes out. If
the engine is re-started the light will not come back on until the fault re-occurs, but a code will be stored in the ECM memory.
