Summit Wagon FWD L4-1795cc 1.8L SOHC (1994)
Cruise Control Switch: Testing and Inspection
MAIN SWITCH TEST
Fig. 46 Main Cluster Switch Assembly Removal
Fig. 47 Speed Control Main Switch Test
1. Remove main cluster switch, then operate switch and check continuity across terminal as shown.
2. Ensure battery voltage is present between terminal four and ground, and that indicator lamp comes On when main switch is turned On with
terminal two connected to battery positive and terminal six is connected to terminal six.
3. Ensure no battery voltage between terminal four and ground is present when main switch is turned Off.
CRUISE CONTROL SWITCH TEST
1. Remove steering wheel horn pad.