Summit Wagon FWD L4-1795cc 1.8L SOHC (1994)
Throttle Cam Bracket
1. Remove throttle cam bracket retaining bolts and remove cable clamp and throttle cam assembly from valve body.
Lower Valve Body
2. Remove 13 bolts "A", and then remove lower valve body and lower separator plate.
3. Remove line relief spring and three steel balls.
4. Remove the seven bolts (B), and then remove the intermediate plate.
5. Remove four steel balls from upper valve body.
Solenoid Valve
6. Remove solenoid valve, stiffener plate and upper separating plate, and then remove a steel ball and a spring from intermediate plate.
Upper Valve Body
7. Remove manual valve from upper valve body.
8. Remove kickdown valve and spring.
9. Remove stopper plate, and then throttle valve and spring.
10. Remove regulator plugs.
