Summit Wagon FWD L4-1795cc 1.8L SOHC (1994)
Fig.40 Talon Drive Pinion Turning Torque Specifications (with oil seal installed)
c. Measure drive pinion turning torque (without oil seal).
d. Position special tool No. MB990835, or equivalent, in side bearing seat of gear carrier as shown. Select a drive pinion rear shim of a thickness
which corresponds to the gap between special tools.
CAUTION:
Clean side bearing seat thoroughly. When positioning special tool, ensure cutout sections of tool are in position shown, and that special tool is
in close contact with side bearing seat. When selecting drive pinion rear shims, keep number of drive shims to a minimum.
Fig.41 Selecting Drive Pinion Adjustment Shims
e. Fit selected drive pinion rear shims to drive pinion, then using bearing installer tool No. MB990728, or equivalent, press rear bearing inner
race onto drive pinion as shown.
