Summit Wagon FWD L4-1795cc 1.8L SOHC (1994)
Wheel Hub: Service and Repair
Front
Fig. 1 Wheel Hub Removal
WHEEL HUB REPLACE
1. Remove axle hub in order as shown, noting following:
a. Remove driveshaft nut from hub using tool No. MB990767, or equivalent.
b. Using tool No. MB991113, or equivalent, disconnect lower arm ball joint from knuckle. Tie cord of tool to nearby part, loosen nut but do not
remove.
c. Using tool No. MB991113, or equivalent, disconnect tie rod from knuckle. Tie cord of tool to nearby part, loosen nut but do not remove.
