eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Rear Wiper Motor Replacement|Page 7867 > < Symptom Related Diagnostic Procedures|Page 7864
Page 1
background image

Wiper Motor: Service and Repair
Rear Wiper Motor Replacement

1. Disconnect battery ground cable.

Removal Service Point

Wiper Motor Assembly Removal

a. Remove the clips in the locations shown in the illustration, and then remove the liftgate trim.
b. Peel of the waterproof film and remove the wiper motor assembly.

2. Remove wiper arm from shaft, then washers and grommets, noting position for installation.
3. Remove liftgate trim panel, then disconnect wiper motor electrical connector.
4. Remove wiper motor attaching screws, then motor from liftgate.
5. Reverse procedure to install.

Rear Wiper Motor Replacement|Page 7867 > < Symptom Related Diagnostic Procedures|Page 7864