Summit Wagon FWD L4-2350cc 2.4L SOHC (1995)
Oil Pump: Service and Repair
Fig. 43 Oil Pan, Oil Pump & Silent Shaft
OIL PAN REPLACE
Replace oil pan, oil pump and silent shafts in numbered sequence shown, noting following:
1. On AWD models, oil pan removal requires that transfer assembly first be removed as outlined under Clutch & Manual Transaxle.
2. On all models, use a brass bar and tool No. MD998727, or equivalent, to knock oil pan loose from block after removing retaining bolts and nuts.
Perform this operation with care so that pan flange is not damaged.
3. Use special tool No. MD998162, or equivalent, to remove front case plug cap.