Summit Wagon FWD L4-2350cc 2.4L SOHC (1995)
Engine Coolant Temperature Gauge Simple Inspection
Unit Inspection
Engine Coolant Temperature Gauge Unit Inspection
Engine Coolant Temperature Gauge Unit Inspection
To check, remove engine coolant temperature gauge unit from the thermostat housing.
1. Immerse unit in 70°C (158°F) water to measure resistance.
Standard value: 104 ± 13.5 Ohms
2. After checking, apply the specified sealant around the thread of engine coolant temperature gauge unit and install on the thermostat housing.
Specified sealant: 3M ATD Part No.8660 or equivalent
