Summit Wagon FWD L4-2350cc 2.4L SOHC (1995)
Ignition Control Module: Testing and Inspection
Ignition Power Transistor
Ignition Power Transistor
NOTE: An analog-type ohmmeter should be used.
1. Connect the negative (-) terminal of the 1.5 V power supply to terminal No. 5 of the ignition power transistor; then check whether there is
continuity between terminal No. 5 and terminal No. 12 when terminal No. 6 and the positive (+) terminal are connected and disconnected.
NOTE: Connect the negative (-) probe of the ohmmeter to terminal No. 12.
2. Replace the ignition power transistor if there is a malfunction.