Talon AWD L4-1997cc 2.0L DOHC Turbo (1991)
Engine Mount: Service and Repair
Engine Mount
Fig. 1 Engine Mount Assembly
Remove engine mount in numbered sequence, Fig. 1, noting the following:
1. Slightly raise and support engine, removing weight of engine from mount.
2. On 1.8L/4-107 engines, bracket (2) is not used.
3. On all engines, inspect insulators for damage or cracks and replace as necessary.
4. Check brackets and replace if deformed or damaged.
5. When installing mounting stoppers, ensure arrow on stopper faces center of engine.
6. Reverse procedure to install.
