eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Evaporator Core|Service and Repair|Page 3704 > < Control Module HVAC|Locations|Page 3700
Page 1
background image

Evaporator Core: Service and Repair

Fig. 15  Replacing Evaporator

Remove evaporator unit in numbered sequence, noting the following:
1. Drain engine coolant.

Fig. 13  Floor Console Removal

2. Remove floor console as shown.
3. Remove instrument panel, refer to Instrument Panel, Gauges and Warning Indicators/Instrument Panel/Service and Repair.
4. To prevent bolts from falling into blower assembly, set air selection damper to outside air introduction.

Evaporator Core|Service and Repair|Page 3704 > < Control Module HVAC|Locations|Page 3700