eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Throttle Position Sensor|Turbo|Page 1683 > < Throttle Position Sensor|Turbo|Page 1681
Page 3
background image

Idle Position Switch Continuity Check

6.

Check for continuity between terminal # 1 and the body of the Throttle Position Sensor.

^

While the throttle valve is fully closed - continuity should exist.

^

While the throttle valve is fully opened - continuity should NOT exist.

Replace the Idle Position Switch, if the results differ from above.

Throttle Position Sensor|Turbo|Page 1683 > < Throttle Position Sensor|Turbo|Page 1681