Talon AWD L4-1997cc 2.0L DOHC Turbo (1991)
5.
Verify that the resistance changes smoothly as the throttle valve is fully opened and closed slowly.
If resistance changes smoothly, then the TPS has been installed correctly.
IDLE POSITION SWITCH CONTINUITY CHECK, after reassembly.
Idle Position Switch Continuity Check
6.
Check for continuity between terminal # 1 and the body of the Throttle Position Sensor.
^
While the throttle valve is fully closed - continuity should exist.
^
While the throttle valve is fully opened - continuity should NOT exist.
Replace the Idle Position Switch, if the results differ from above.
