Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
Throttle Full Close Switch: Testing and Inspection
1. Disconnect the throttle position sensor connector.
2. Check the continuity between the throttle position sensor connector side terminal 3 and terminal 4.
Accelerator pedal
Continuity
Depressed
Non-conductive (infinite ohms)
Released
Conductive (0 ohms)
3. If out of specification, replace the throttle position sensor.
NOTE: After replacement, the closed throttle position switch and throttle position sensor should be adjusted. Refer to Adjustments. See: Adjustments