Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
Neutral Safety Switch: Adjustments
1. Set the selector lever to the "N" (Neutral) position.
2. Loosen the control cable to manual control lever coupling adjusting nut to free the cable and lever.
3. Set the manual control lever to the neutral position.
4. Loosen and adjust the park/neutral position switch body.
Then the hole in the end of the manual control lever and the hole in the flange of the park/neutral position switch body must be aligned.
5. Tighten the park/neutral position switch body mounting bolts to the specified torque. Be careful at this time that the position of the switch body is
not changed.
6. Lightly pull the transaxle control cable in the arrow's direction, and tighten the adjusting nut to the specified torque.
7. Check that the selector lever is in "N" position.
8. Check that each range on the transaxle side operates and functions correctly for each position of the selector lever.
