Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
Front Steering Knuckle: Service and Repair
REMOVAL
1. Remove front wheel speed sensor. Refer to Brakes and Traction Control.
2. Remove front hub assembly. Refer to Transmission and Drivetrain.
3. Follow removal procedure outlined in the illustration, noting the following.
4. Use special tool to separate ball joints at all connections to the steering knuckle.
CAUTION:
1. Use the special tool to loosen the tie rod end mounting nut. Only loosen the nut: do not remove it from the ball joint.
2. Support the special tool with a cord, etc: to prevent it from coming off.
