Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
CROSSMEMBER BUSHING A AND B REPLACEMENT
1. Apply soapy water to the contact surface of the bush when press-fitting the bush.
2. The bush should be press-fitted so that the inner pipe projection is at the standard length.
CROSSMEMBER BUSHING C REPLACEMENT
1. Use the special tool to drive out and press-fit the crossmember bushing C.
2. The bushing should be press-fitted so that the inner pipe projection is at the standard length.
INSPECTION
-
Check the crossmember for cracks or deformation.
-
Check the bushings for cracks or deterioration.
INSTALLATION
Follow removal steps in reverse order for installation.