Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
Band Apply Servo: Adjustments
1. Completely remove all dirt and other materials adhered around the kickdown servo switch.
2. Remove the snap ring.
3. Remove the kickdown servo switch.
4. To prevent rotation of the piston, engage the pawl of the special tool into the notch of the piston, and using the adapter, secure the piston as shown.
CAUTION:
-
Don't press in the piston with the special tool.
-
When mounting the adapter on the transaxle case, tighten it by hand. Do not overtighten.
5. Loosen the lock nut to before the V-groove of the adjusting rod, and tighten the special tool (inner) until it contacts the lock nut.
6. Engage the special tool (outer) on the lock nut. Rotating the outer cylinder counterclockwise and the inner cylinder clockwise, lock the lock nut
and special tool (inner).
7. Attach a torque wrench to the special tool (inner) and tighten to a torque of 10 Nm (86.4 inch lbs.) and repeating "Tighten" and "Loosen" two
times then torque to 5 Nm (38.4 inch lbs.). After that, back off the special tool (inner) 2 to 2-1/4 turns.
