Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
B. Bolt installation. (4)
1. First apply sealant to the end [5 mm (0.20 inch)] of the bolt threads and then tighten to the specified torque in the order shown in the
figure.
Center differential drive gear bolt: 75 Nm (54 ft. lbs.)
Specified sealant: MOPAR Part No. 4318031 or Part No. 4318032 or equivalent.
C. Taper roller bearings installation. (3)
1. Using the special tool, install the taper roller bearing on the center differential flange.
D. Taper roller bearings installation. (2)
1. Using the special tool, install the taper roller bearing on the transfer driven gear.
