Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
4. Check the master cylinder or clutch hose for fluid leakage.
5. Check the clutch hose or pipe for cracks or clogging.
INSTALLATION
Installation in reverse order as removal.
NOTE: Installation service points as follows:
A. Clutch hose/clutch pipe installation. (9, 11 & 12)
1. Temporarily tighten the clutch pipe flare nut by hand, and then tighten it to the specified torque, being careful that the clutch hose does not
become twisted.
2. After tightening the clutch pipe flare nut, check to be sure there is no leakage of the clutch fluid.
NOTE: Operational steps after installation as follows:
1. Fill clutch fluid.
2. Bleed clutch line.
3. Adjust clutch pedal.