Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
16. Install the spider assembly to the shaft from the direction of the spline bevelled section.
17. Install center bearing.
18. Apply the specified grease to the rear surfaces of all dust seals.
19. Use the special tools to install the dust seal so that its surface runs even with that of the center bearing bracket.
20. Apply MOPAR Multi-mileage Lubricant Part No. 2525035 or equivalent to the lip of each dust seal.
NOTE: When applying grease, make sure that it does not adhere to anything outside the lip.
21. Install inner shaft.
