Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
Needle Bearing
1. Combine the needle bearing with the shaft or bearing sleeve and gear and check that it rotates smoothly without abnormal noise or play.
2. Check the needle bearing cage for deformation.
Synchronizer Ring
1. Check the clutch gear teeth for damage and breakage.
2. Check the internal surface for damage, wear and broken threads.
3. Force the synchronizer ring toward the clutch gear and check clearance "A". Replace if it is out of specification.
Limit: 0.5 mm (0.020 inch)
Synchronizer Outer Ring, Inner Ring And Cone
1. Check that there are no scratches of damage on the clutch gear teeth and cone surface.
2. Check that there are no scratches, wear or peeling on the paper lining surface.
