Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
A. Taper roller bearing installation. (9)
B. Spacer selection. (4)
1. Use the existing spacer to assemble the transfer case adapter.
2. Using the special tool, check that the bevel gear rotating drive torque is within standard range.
Standard value: 1.0-1.7 Nm (0.72-1.23 ft. lbs.)
3. If the rotating drive torque is outside of the standard range, adjust using adjusting spacers.
C. Taper roller bearing installation. (3)
D. Driven bevel gear installation. (2)
1. Attach the driven bevel gear to the transfer case adapter and then align their matching marks.
E. Lock nut installation. (1)
