Talon FWD L4-1997cc 2.0L DOHC (1990)
aligned, and have the balance shaft out of phase. This may cause a SEVERE engine vibration.
B5.
Install the provided timing belt over the intake side camshaft sprocket and clamp it in position with a clip (Figure 9).
B6.
Install the timing belt over the exhaust side sprocket, aligning the timing marks as shown in Figure 3 (two wrenches may be required) and
clamp the belt in position with a clip (Figures 10 & 11).
B7.
Position the timing belt around the idler pulley, oil pump sprocket, crankshaft sprocket and tensioner pulley (in that order) as shown in
Figure 12.
