Talon FWD L4-1997cc 2.0L DOHC (1990)
Accelerator Pedal: Service and Repair
REMOVAL OF ACCELERATOR CABLE
Accelerator Cable Adjustment Bolts
1.
Loosen the accelerator cable adjusting nut.
2.
Disconnect the accelerator cable from the accelerator arm.
3.
Remove the accelerator cable.
REMOVAL OF ACCELERATOR PEDAL
Accelerator Cable And Pedal Assembly
1.
Remove the bushing and inner cable from the accelerator arm.
2.
Loosen the bolts of the accelerator arm bracket and remove.
INSPECTION
1.
Check the inner and outer cable for damage.
2.
Check the cable for smooth movement.
3.
Check the accelerator arm for deformation.
4.
Check the return spring for deterioration.
5.
Check the connection of the bushing to end metal fitting.
6.
Check the accelerator switch for proper operation.
INSTALLATION
1.
When installing the return spring and accelerator arm, apply multi-purpose grease around each moving point of the accelerator arm.
