Talon FWD L4-1997cc 2.0L DOHC (1990)
Checking The Control Relay
5.
Check for continuity between terminals # 3 and # 2, while the lead wire from the positive terminal of the battery is connected to terminal # 9 of the
relay.
Continuity should exist during connection.
6.
Connect the lead wire from the positive terminal of the battery to terminal # 3 of the Control Relay.
Checking The Control Relay
7.
Check for voltage at terminal # 2, when the lead wire from the negative terminal of the battery is connected to terminal # 7 of the relay.
Battery voltage should exist during connection.