Talon FWD L4-1997cc 2.0L DOHC (1990)
Fig. 6 Checking Fasten Switch
1.
Remove the fasten switch.
2.
Using a suitable ohmmeter, check for continuity between switch terminals.
3.
Continuity should be present with switch knob released and no continuity should be present with the knob pushed in.
Outer Switch Test
Fig. 8 Checking Outer Switch
1.
Disconnect the outer switch connector.
2.
Pull the shoulder belt out farther than its midpoint.
3.
Using a suitable ohmmeter, check continuity as shown.
4.
Continuity should be present with the belt pulled out past its midpoint.
5.
No continuity should be present when belt is pulled out less then its midpoint.
Release and Fasten Switch