Talon FWD L4-1997cc 2.0L DOHC Turbo (1995)
Hydraulic Control Assembly - Antilock Brakes: Testing and Inspection
Hydraulic Unit Testing
1. Raise and support vehicle.
2. Release parking brake and feel drag force on each wheel.
3. Turn ignition key off and connect diagnostic scan tool to ABS mode.
4. Set shift lever to the NEUTRAL position.
5. Use scan tool to force-drive ABS actuator.
6. Turn wheel by hand and check change in braking force when brake pedal is depressed.
Fig 83 Hydraulic Control Unit Inspection
Fig 84 Hydraulic Control Unit Inspection
7. Compare brake system operation to above.
