eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Radiator Fan Relay <--> [Radiator Cooling Fan Motor Relay] > < Electronic Brake Control Module|Locations|Page 38
Page 1
background image

Radiator Cooling Fan Control Module: Testing and Inspection

1. Disconnect engine coolant temperature sensor electrical connector and connect an ohmmeter between sensor terminals.
2. Measure resistance between terminals. 

9.0-11.0 Kohms @ 77°F
0.6-0.8
 Kohms @ 212°F

3. If resistance is not as specified, replace sensor.

Radiator Fan Relay <--> [Radiator Cooling Fan Motor Relay] > < Electronic Brake Control Module|Locations|Page 38