Talon FWD L4-1997cc 2.0L DOHC Turbo (1995)
1. Turn the ignition key to the "LOCK" position, disconnect the negative battery cable and tape the terminal.
Caution: Wait at least 60 seconds after disconnecting the battery cable before doing any further work. See: Service Precautions/Technician
Safety Information/Air Bags Precautions
2. Remove the floor console assembly.
3. Place a flat-tipped screwdriver against the lock spring at the lock lever notch and push the spring toward the unit.
Caution: Do not use excessive force to raise the lock lever (green).
