Talon FWD L4-1997cc 2.0L DOHC Turbo (1995)
Fig.77 Taper Roller Bearing Installation
b. Torque locknut to 0.02-115 ft. lbs., then stake locknut at two places.
c. Using wrench adapter tool No. MD998806 and suitable torque wrench, or equivalents, check turning torque of the driven bevel gear assembly
as shown. If turning torque is not within 0.72-1.23 ft. lbs., adjust with adjusting spacer.
Fig.78 Turning Drive Torque Of Driven Bevel Gear Assembly Check
Transfer Case Sub-Assembly
1. Remove transfer cover.
