eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Diagnostic Connector - ABS > < Transmission Temperature Sensor/Switch, A/T|Specifications|Page 3751
Page 1
background image

ABS Light: Testing and Inspection

Check that the ABS warning light illuminates as follows.

1. When the ignition switch is turned to "ON", the ABS warning light illuminates.
2. When the ignition switch is turned to "START", to start the engine, the ABS warning light switches off after approximately 1 second.
3. If the illumination is other than the above, check the diagnostic trouble codes.

Diagnostic Connector - ABS > < Transmission Temperature Sensor/Switch, A/T|Specifications|Page 3751