Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Heater Core: Service and Repair
REMOVAL
To remove follow steps in image.
Step 7 --- Clip Removal
1. Use a philips-head screwdriver to push inward the pin (at the center of the clip) to a depth of about 2 mm (0.08 in.).
2. Pull the clip outward to remove it.
CAUTION: Do not push the pin inward more than necessary because it may damage the grommet, or the pin may fall in, if pushed too far.
