Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Blower Motor: Service and Repair
REMOVAL
To remove follow steps in image.
Step 6 - Clip Removal
1. Use a philips-head screwdriver to push inward the pin (at the center of the clip) to a depth of about 2 mm (0.08 in.).
2. Pull the clip outward to remove it.
CAUTION: Do not push the pin inward more than necessary because it may damage the grommet, or the pin may tall in, if pushed too tar.
INSTALLATION
For installation reverse steps in image and note the following:
