Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Evaporator Case: Service and Repair
Cooling Unit Removal and Installation
REMOVAL
To remove follow steps in image.
Step 13 --- Clip Removal
1. Use a philips-head screwdriver to push inward the pin (at the center of the clip) to a depth of about 2 mm (0.08 in.).
2. Pull the clip outward to remove it.
CAUTION: Do not push the pin inward more than necessary because it may damage the grommet, or the pin may fall in, if pushed too far.
