Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
B. Timing Belt Removal.
1. Turn the crankshaft in the forward direction (to the right) to align the camshaft sprocket timing marks.
CAUTION: Always turn the crankshaft in the forward direction only.
2. Loosen the tension pulley center bolt.
3. Move the tension pulley to the water pump side, and then remove the timing belt.
CAUTION: If the timing belt is to be re-used, use chalk to mark (on its flat side) an arrow indicating the clock-wise direction.
Installation
Installation in reverse order as removal.
Installation Service Points
A. Auto Tensioner Installation.
1. Apply 98 - 196 N (22 - 44 lbs.) force to the auto tensioner by pressing it against a metal (cylinder block,..etc.), and measure the movement of
the push rod.
Standard value: Within 1 mm (0.04 inch)
A: Length when it is free (not pressed)
B: Length when it is pressed
A-B: Movement
2. If it is out of the standard value, replace the auto tensioner.
