Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Fuel Pressure Control Solenoid: Testing and Inspection
NOTE: When disconnecting the vacuum hose, always make a mark so that it can be reconnected at original position.
1. Disconnect the vacuum hose from the solenoid valve.
2. Disconnect the harness connector.
3. Connect a hand vacuum pump to the nipple.
4. Connect a battery to the solenoid valve and apply a vacuum to check air-tightness.
Battery voltage
B nipple
Normal condition
Not applied
Open
Vacuum leaks
Closed
Vacuum maintained
Applied
Open
Vacuum maintained
5. Measure the resistance between the terminals of the solenoid valve.
Standard value: 36 - 44 ohms [at 20°C (68°F)]