Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Post-installation Inspection
1. After installing the clock spring, the steering wheel, the column covers and the air bag module, check steering wheel for noise, binds or difficult
operation.
2. Reconnect the negative battery terminal. Turn the ignition key to the "ON" position. floes the "SRS" warning light illuminate for about 7 seconds,
turn OFF and then remain OFF? If yes, SRS system is functioning properly. See: Testing and Inspection.
Clock Spring Check
1. Check connectors and protective tube for damage, and terminals for deformation.
2. Visually check the case for damage.
If, even one abnormality is discovered, replace the clock spring with a new one.
3. Check for continuity between the No.1 connector of the clock spring and connectors No.3 and 4.
