Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
Ignition Switch: Initial Inspection and Diagnostic Overview
WHEN USING THE SCAN TOOL
1. Connect the scan tool to the data link connector.
CAUTION: Always turn the ignition switch off when connecting and disconnecting the scan tool.
2. It buzzer of the scan tool sounds once when a switch is operated (ON/OFF), the ECU input signal for that switch circuit system is normal.
WHEN USING A VOLTMETER
1. Use the special tool to connect a voltmeter between the ground terminal and the ETACS terminal of data link connector.
2. If the voltmeter indicator deflects once when a switch is operated (ON/OFF), the ECU input signal for that switch circuit system is normal.