Talon FWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1998)
28. Screw in tie rod end to have the shown dimension. Lock with lock nut.
Dust Cover Replacement
Replace the dust cover by the following procedure only if the dust cover has become damaged by accident during servicing.
1. Remove the dust cover.
2. Pack dust cover interior with multipurpose grease.
3. Apply 3M ATD Part No. 8663 or equivalent to dust cover lip.
4. Using the special tool, install the dust cover to the tie rod end ball joint.